Rauch MDS 8.2 - Connecting the Electric Slide Actuators; Connecting the Electronic Slide Actuators

Fig. 29: Metering slide position
[1] Completely open
[2] Open
[3] Closed
7.6.2 Connecting the electric slide actuators
n
Version C
The machines of the version C are equipped with electronic slide actuators.
The electronic slide actuator is described in a separate operator’s manual for the E‑CLICK
operating unit. This operator’s manual is included in the scope of delivery.
7.6.3 Connecting the electronic slide actuators
The version Q machines are equipped with an electronic metering slide actuator.
The electronic slide actuator is described in a separate operator’s manual for the operating unit.
This operator’s manual is supplied with the control unit.
7. Commissioning
60
5902916 MDS 8.2/14.2/18.2/20.2