Extension
MDS 18.2/20.2
M 430 M 630 M 800 M 1100
Change in capacity + 400 l + 600 l + 800 l + 1100 l
Change in filling height + 18 cm + 30 cm + 18 cm + 27 cm
Filling width 178 cm 228 cm
Maximum extension size 190 x 120 cm 240 x 120 cm
Extension weight 30 kg 42 kg 49 kg 59 kg
Description 4-sided
4.4 Special equipment
We recommend that you have the extra equipment fitted and mounted on the basic machine by
your supplier or an authorized service center.
Some models are not available in all countries.
The available special equipment depends on the country of use of the machine and is not listed
fully here.
• Contact your dealer/importer if you need specific special equipment.
4.4.1 Extensions
The capacity of the standard unit can be increased by fitting a hopper extension.
The extensions are bolted to the standard hopper.
An overview of the extensions can be found in chapter 4.3.3 Technical data for the extensions
4.4.2 Hopper cover
A hopper cover can be fitted to protect the spreading material from humidity.
The hopper cover is screwed both to the main hopper as well as to the additionally mounted hopper
extensions.
4. Machine data
MDS 8.2/14.2/18.2/20.2 5902916
33
To Next Page
Loading...
