Rauch MDS 8.2 - Lubrication; Drive Shaft Lubrication; Lubricating Other Components

[1] Oil level checking screw
Fig. 95: Transmission oil filling and draining points
Checking the oil filling level
u
Open the checking screw.
The oil level is satisfactory when the oil reaches the lower edge of the hole.
11.14 Lubrication
11.14.1 Drive shaft lubrication
n
Universal drive shaft
• Lubricant: Grease
• See operator’s manual of the manufacturer.
11.14.2 Lubricating other components
n
Other components
• Lubricant: Grease, oil
Lubrication points
• Upper and lower link balls
• Joints, bushes
• Metering slide, position indicator
• Lubricant: Graphite grease
Lubrication points
• Spreading disc hub
• Agitator shaft
• Agitator finger
• Weigh cells
11. Maintenance and service
140
5902916 MDS 8.2/14.2/18.2/20.2