5 Axle load calculation
WARNING!
Overload
Mounted units on the front or rear three-point linkage must not cause the approved total weight to
be exceeded.
u
Before using the machine, ensure that these conditions are met.
u
Implement the following calculations or weigh the tractor machine combination.
Define the total weight, axle loads, tire
capacity and minimum additional mass:
The following values are required for the
calculation:
Description Units Description Obtained by
T kg
Tractor unladen weight Refer to the tractor operator's
manual
Measure on scale
T1 kg
Unladen load on tractor front axle Refer to the tractor operator's
manual
Measure on scale
T2 kg
Empty load on tractor rear axle Refer to the tractor operator's
manual
Measure on scale
t kg Axle loads (Tractor + machine) Measure on scale
t1 kg
Load on front axle (Tractor +
machine)
Measure on scale
t2 kg
Load on rear axle (Tractor +
machine)
Measure on scale
M1 kg
Total weight of front tool or front
ballast
Refer to the machine price-list or
operator's manual
Measure on scale
5. Axle load calculation
38
5902916 MDS 8.2/14.2/18.2/20.2
To Next Page
Loading...
