Rauch MDS 8.2 - Set the Mounting Height Based on the Fertilizer Chart

Fig. 24: Maximum admissible mounting height during normal and late fertilizing
The maximum admissible mounting height depends on the following factors:
Fertilization method
Maximum admissible mounting height
V [mm] H [mm]
Normal fertilizing 850 850
Late fertilization 730 830
7.5.3 Set the mounting height based on the fertilizer chart
The mounting heights in the fertilizer chart (A and B) are always measured in the field from the top of
the crop height to the bottom edge of the frame.
The values of A and B can be taken from the fertilizer chart.
The maximum admissible mounting height depends on the type of fertilizer:
7. Commissioning
54
5902916 MDS 8.2/14.2/18.2/20.2