Setting the mounting height for normal fertilizing
ü
The machine is installed at the highest connecting point of the upper link at the tractor.
ü
The lower link of the tractor is installed at the upper coupling point of the lower link of the
machine.
u
Determine the mounting heights A and B (above crop height) from the fertilizer chart.
u
Compare the mounting heights A and B plus the crop height with the maximum admissible
mounting heights at the front (V) and rear (H).
Fig. 25: Mounting position and height during normal fertilizing
u
If the maximum admissible mounting height of the machine is exceeded during normal fertilizing
or if the mounting heights A and B cannot be reached: The machine is to be mounted according to
the late fertilizing values.
The following applies:
• A + crop height ≤ V: max. 850
• B + crop height ≤ H: max. 850
7. Commissioning
MDS 8.2/14.2/18.2/20.2 5902916
55
To Next Page
Loading...
