Rauch MDS 8.2 - Spreading to One Side

9.8 Spreading to one side
Version Settings for spreading to one
side
Result
K
u
To spread to the left or to the
right, release the
corresponding control valve.
The springs pull the respective
metering slide against the stop.
K with two-way unit special
equipment
u
To spread to the left or to the
right, open or close the
corresponding ball valve on
the two-way unit.
u
Release the control valve.
The springs pull the respective
metering slide against the stop.
D
u
To spread to the left or to the
right, actuate the
corresponding control valve.
The hydraulic cylinder pulls the
respective metering slide against
the stop.
D Mono
• Spread to the left-hand side
The hydraulic cylinder pulls the
left metering slide against the
stop.
C
u
To spread to the left or right,
actuate the corresponding
rocker switch on E-CLICK.
The actuator pulls the respective
metering slide against the stop.
Q
u
To spread to the left or to the
right, actuate the
corresponding start/stop
button on the control unit.
The actuator opens the
respective metering slide
according to the electronic
control unit.
9. Spreading operation
MDS 8.2/14.2/18.2/20.2 5902916
87