WARNING!
Risk of injury due to rotating machine parts
If the extension vanes are installed with the old screws and nuts, then the spreading vanes may
come loose and can cause serious injuries.
u
Only use the new screws, nuts and washers supplied to install new components.
u
Push the new extension vane [4] into the
main vane [5].
Fig. 83: New extension vane
u
Screw the spreading vane onto the
spreading disc using the new screw [8], the
new lock nut [6] and the new washer [7].
Fig. 84: Spreading vane attachment points
11. Maintenance and service
130
5902916 MDS 8.2/14.2/18.2/20.2
To Next Page
Loading...
