Rauch MDS 8.2 - Page 132

u
Unscrew the self-locking spring fastening
nut of the spreading vane with a size 13
wrench.
Fig. 86: Removing the screws
u
Remove the flat spring [1] using the
adjustment lever [2].
Fig. 87: Removing the flat spring
u
Remove the screw [3] along with the
respective nut and washer.
Fig. 88: Screw on the underside of the spreading
discs
11. Maintenance and service
132
5902916 MDS 8.2/14.2/18.2/20.2