4) Calculation of the total weight: M real
M real = M1 + T + M2
Indicate calculated total load value and the one authorized as indicated in the tractor operator's
manual.
5) Calculation of the actual rear axle load: T2 real
T2 real = M real - T1 real
Indicate rear axle calculated load value and the one indicated in the tractor operator's manual.
6) Tire carrying capacity
Indicate double (2 tires) the authorized load value (see tire manufacturer indications).
Table:
Actual value obtained
by calculation
Value authorized
according to
operator's manual
Double value of the
authorized capacity
per tire (2 tires)
Minimum front/rear
ballasting
kg
Total weight kg kg
Load on front axle kg kg kg
Load on rear axle kg kg kg
The minimum ballasting must be made by fitting a tool or an additional
mass to the tractor.
The values obtained must be below or equal the authorized values.
5. Axle load calculation
40
5902916 MDS 8.2/14.2/18.2/20.2
To Next Page
Loading...
