Fig. 22: Mounting position
Mounting instructions
• The machine can be connected to a tractor with category III linkage only with category II
clearance. Use reducing sleeves.
• The bottom and upper link pins must be secured with linch pins or spring clips.
• Attach the machine according to the values in the fertilizer chart. This guarantees correct cross-
distribution of the fertilizer.
• Any oscillating movements during spreading are to be avoided. Make sure that the machine does
not have too much play to the sides.
○ The lower link arms of the tractor are to be braced by means of stabilizing struts or chains.
7. Commissioning
50
5902916 MDS 8.2/14.2/18.2/20.2
To Next Page
Loading...
