u
Suspend the calibration test chute under
the left outlet (in the direction of travel).
Fig. 36: Attach the calibration test chute
u
Set the metering slide stop to the scale value from the fertilizer chart.
The version Q machine is equipped with electronic adjustment of the metering slide opening.
The metering slide is automatically moved to the opening position by the QUANTRON control unit
when the calibration test function is selected.
Please observe the operator's manual for the control unit.
WARNING!
Risk of injury due to rotating machine parts
Rotating machine components (universal drive shaft, hubs) may catch and pull-in body parts or
objects. Contact with rotating machine components may cause bruises, abrasions and crushing
injuries.
u
Always stay outside the area of rotating hubs while the machine is running.
u
When the drive shaft is rotating, the metering slides are to be operated from the tractor seat
at all times.
u
Ensure that nobody is present in the hazard zone of the machine.
8. Calibration
68
5902916 MDS 8.2/14.2/18.2/20.2
To Next Page
Loading...
