Specified parameters
Type of fertilizer ENTEC 26 COMPO BASF
Application rate 300 kg/ha
Working width 12 m
Spreading disc type M1
Forward speed 10 km/h
u
The following settings are to be applied to the machine according to the fertilizer chart:
Mounting height 50/50 (A = 50 cm, B = 50 cm)
Metering slide adjustment 160
PTO speed 540 rpm
Spreading vane settings C3-B2
n
Example of full border spreading during normal fertilizing
Fig. 45: Full border spreading during normal fertilizing
Full border spreading in normal fertilizing mode refers to a spreading technique in which a bit more
fertilizer lands beyond the border of the field. Therefore, there is just a slight underfertilization at the
field boundary.
Specified parameters
Type of fertilizer ENTEC 26 COMPO BASF
Application rate 300 kg/ha
Working width 12 m
Spreading disc type M1
Forward speed 10 km/h
9. Spreading operation
82
5902916 MDS 8.2/14.2/18.2/20.2
To Next Page
Loading...
