Rauch MDS 8.2 - Page 84

Mounting height 0/6 (A = 0 cm, B = 6 cm)
Metering slide adjustment 160
PTO speed 540 rpm
Spreading vane settings C3-B2
n
Example of full border spreading during late fertilizing
Fig. 47: Full border spreading during late fertilizing
The yield-optimized boundary spreading in late fertilizing is a fertilizer spreading mode in which some
fertilizer crosses the field border. Therefore, there is slight underfertilization at the field boundary.
Specified parameters
Type of fertilizer ENTEC 26 COMPO BASF
Working width 12 m
Spreading disc type M1
Forward speed 10 km/h
Application rate 300 kg/ha
On the full border spreading side, both spreading vanes should be set to the value specified in
the fertilizer chart.
On the field-interior spreading side, the spreading vanes of the other spreading disc remain
in their position.
The following settings are to be applied to the machine according to the fertilizer chart:
Mounting height 0/6 (A = 0 cm, B = 6 cm)
Metering slide adjustment 160
PTO speed 540 rpm
9. Spreading operation
84
5902916 MDS 8.2/14.2/18.2/20.2