(a.3) Top view (a.4) Left view
Figure2 The dimensions of RFL-C30000M-CE continuous fiber laser
The structure size of RFL-C30000M-CE laser is 1050×1540×1290mm (width×height×depth;
including casters and rings, without warning light); RFL-C30000M-CE laser weighs less than 900kg.
The RFL-C30000M-CE continuous fiber laser uses the RFL-QP output optical cable, and the
external dimensions of the output optical cable head are shown in Figure 3.
Figure 3 External dimensions of the output optical cable head
Note: The dimensions in the above diagram are in the unit of millimeter (mm).
Before the laser works, make sure that the two copper contacts (Interlock pins) on the output head
are shorted, otherwise the laser will not work properly. Before installing the output cable into the
processing head, the lens of the output cable must be inspected. If the output cable lens is dirty, the lens
must be cleaned. It is forbidden to disassemble the output lens by anyone other than staff in Raycus,
otherwise the warranty will be invalidated.
3.2 Installation Rule
a) Place the laser horizontally in a suitable position and fix it as necessary;
To Next Page
