Raymarine E120W - Page 197

Chapter 9: Video 181
Note: Video 1 mirrors your choice for Video 2 and is no longer selectable.
4. Repeat steps 2 and 3 for Video 3. Video 4 mirrors your choice for Video 3 and is no
longer selectable.
Editing the video source name
By default your 4 video sources are labelled Video 1 - 4. If required, you can change
these to a more meaningful name e.g. engine room, stern, bow etc.:
1. Open the Video Setup Menu, as described on
page 180 .
2. Select the video source whose name you wish to change:
3. Change the name and save:
Note: For details of how to edit a dialog box, please see page 15
4. Repeat if necessary for the videos 2, 3 and 4.
Any changes that you have made are reflected in the Video Setup Menu and on the
video application’s soft keys e.g.
D8486_1
OK
x2
Video 2 mirrors your choice for Video 1
and can no longer be selected
independently of Video 1.
Video Setup Menu
Cycle 1 VIDEO 1
Cycle 2 VIDEO 2
Cycle 3 VIDEO 3
Cycle 4 VIDEO 4
Cycle Period 10secs
Video 2... (S-VIDEO VIDEO 1)
Video 3... COMPOSITE VIDEO 3
Video 4... COMPOSITE VIDEO 4
Vi
d
e
o
1... S-VIDE
O
VIDE
O
1
D9011_1
Select
Highlight required video
Video Setup Menu
Cycle 1 VIDEO 1
Cycle 2 VIDEO 2
Cycle 3 VIDEO 3
Cycle 4 VIDEO 4
Cycle Period 10secs
Video 1... COMPOSITE VIDEO 1
Video 3... COMPOSITE VIDEO 3
Video 4... COMPOSITE VIDEO 4
V
i
d
eo 2...
CO
MP
O
SITE VIDE
O
2
Video 1 Install
Select Rename
Type COMPOSITE
R
enam
e
D8490_1
Change name as required
using:
Rename Video Source
Video name: VIDEO 2
OK
x2
e.g.
,
or
Soft key