RCA VR681HF - Add or Remove Channels from Vcrs Memory; 10. Use TV•VCR Button

10
Setting Up the VCR
Startup
9. Add or remove channels from the VCR’s
memory.
After programming the channels into memory, you can
remove channels if some of the channels have weak
signals, or you do not want to watch them. You can also
add channels that were missed or removed.
A. Press MENU on the remote to see the MAIN MENU.
B. Press the DOWN ARROW to highlight “Channel
memory set,” then press ENTER.
All channels in memory are displayed with a green
background
C. Highlight a channel with the UP or DOWN ARROW.
When a channel is highlighted, the background
changes color depending on its status:
Green: Channel is in memory.
Yellow: Channel in memory is highlighted.
Pink: Channel to be deleted from memory
is highlighted.
Gray: Channel is deleted from memory.
If you want to add a channel that does not appear
on the Channel Memory screen, then highlight the
channel number in the upper right corner and press
two number buttons. For cable channels over 100,
press 100 and then two number buttons.
D. Press ENTER to add or delete the channel.
10. Use TV•VCR button.
Skip this step if you used one of the advanced
hookups.
When using a basic hookup, the TV•VCR button lets
you switch between the picture coming from the VCR
or the picture from the TV channel. This button lets you
record a program on the VCR while watching another
channel on the TV. Details are on page 23.
A. Press SELECT VCR to set the remote to control the
VCR.
B. Press TV•VCR to see the picture from the VCR.
The VCR indicator lights in the display panel.
C. Press CHANNEL up or down on the VCR or CHAN
on VCR’s remote to change channels on the VCR.
The channel number changes in the display panel.
D. Press TV•VCR to see the TV channels.
The VCR indicator does not light in the display.
Press the SELECT TV button to set remote to
control the TV and change channels using the TV’s
remote.
E. Return the TV to the VCR viewing channel—CH3
or CH4.
F. Press SELECT VCR, then TV•VCR to switch back to
the picture from the VCR.
MAIN MENU
Press ENTER to SELECT
1 Timer recording list
2 Clock set/adjust
3 Antenna/Cable set
4 Channel memory set
5 VCR function setup
6 StarSight setup
MAIN MENU
Press ENTER to SELECT
1 Timer recording list
2 Clock set/adjust
3 Antenna/Cable set
4 Channel memory set
5 VCR function setup
6 StarSight setup
CHANNEL MEMORY
Press PROG for AUTO SETTING
Press Enter to ADD/DELETE
2
3
4
5
6
7
8
9
11
12
13
14
15
16
17
18
19
20
21
22
23
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
51
52
53
54
55
56
57
58
59
60
61
98
99