14
Using the Remote Control
StarSight Function Buttons
This section describes the buttons you will use for the StarSight System. See
the “Subscribing to StarSight Information” on pages 29-30.
CHAN s/t
(Channel Up or Down)
Go to the next or previous
channel.
CLEAR
Cancels the current screen or
Pop-up.
Cancels a timer recording.
DAY–/+
Moves back or ahead 24 hours
from the screen time currently
displayed in StarSight Program
Guides. Hold to repeat.
ENTER
Turns to the highlighted channel;
enters selections in StarSight
Setup.
EXIT
Cancels the current screen or Pop-
up or returns you to currently
tuned channel.
GUIDE
Displays the Grid Guide or
Channel Guide.
INFO
Displays StarSight Information in
Pop-up.
LIST
Displays list of single recordings
and series recordings.
MENU
Accesses RCA on-screen menu
and StarSight Setup menu.
Numbers (0 through 9 )
Select channels and enter number
selections in StarSight Setup.
PAGE s/t (Up or Down)
Displays the previous or next
page. Hold to repeat.
RECORD
Starts recording or schedules a
program for recording.
SELECT VCR
Sets the remote to control your
VCR.
SP•SLP (Tape Speed)
Selects the recording speed for a
StarSight recording.
(SP or SLP).
THEME
Displays the Theme Guide’s
program categories.
TV•VCR
Switches the picture signal so
that it either comes from the VCR
or the TV channel. See page 10.
VCR POWER
Turns VCR on or off.
Buttons
To Next Page
Loading...
