18
Picture Search
You can search a picture during playback by fast forwarding or rewinding the tape.
Sound is turned off during picture search. Picture Search works for tapes recorded
in the SP or SLP speed.
Fast Forward Search
1. Press FWD to search forward at a faster-than-
normal speed. Press FWD again or PLAY to return
to normal playback
2. Press FWD and hold to advance at a higher rate of
speed. Release the button to return to normal
playback
Rewind Search
1. Use REW instead of FF for the same steps described
in “Fast Forward Search.”
Variable Speed Picture Search and Frame
Advance—Using JOG+/– and SHUTTLE Dial
Not only are the FWD and REW buttons used for picture search during playback,
but you can use the SHUTTLE dial for varying speeds, from a pause/still picture to
forward or reverse picture search. The JOG + and – buttons are used for frame
advance—a single frame at a time during pause/still.
Sound is turned off during picture search and frame advance. Tapes recorded in SP
or SLP speed give the best picture.
Variable Speed Picture Search
Press the SHUTTLE RIGHT ARROW to advance
forward or SHUTTLE LEFT ARROW to reverse
playback from a pause/still picture. Each press
changes the speed. Press PLAY to return to normal
playback.
Frame Advance
Press JOG+/– to advance or reverse the picture frame-
by-frame for viewing. Each press advances a frame.
Go to 0:00:00 and STOP
The Go-to feature allows you to return to the 0:00:00 spot on the tape. Sometimes
you may want to watch a specific segment of a tape over and over.
1. Begin playing the tape.
2. Press CLEAR to reset the timer counter to 0:00:00
when you find the spot on the tape you want to
return to.
3. Press INDEX when the tape is playing or stopped.
The “Go to 0:00:00 and STOP” display appears.
4. Press RIGHT or LEFT ARROW to search for 0:00:00.
The VCR automatically rewinds or fast forwards to
the 0:00:00 position and stops.
Using the Playback Features
Playing a Tape
To Next Page
Loading...
