16
Playing a Tape
Operating Instructions
To play a tape
1. Turn on the TV and tune it to channel 3, 4, or TV’s video input to see the
picture from the VCR.
2. Insert a tape in the VCR.
VCR automatically turns on. The cassette-in indicator lights, the VCR
indicator lights, and the clock changes to counter. The tape automatically
begins playback if the safety tab on the cassette has been removed and the
Auto Play feature is turned on.
3. Press PLAY, if necessary.
The VCR automatically tracks (TRACKING display appears) the tape for a
few seconds, then the sound begins. If you need to adjust tracking
manually, use the TRACKING buttons on the remote.
4. Press STOP.
5. Press REW.
The VCR will automatically rewind the tape if it reaches the end of the tape
during playback. While rewinding, you can press VCR POWER and the
VCR will turn off after rewinding.
6. Press EJECT to eject the tape once it is completely rewound.
To Next Page
Loading...
