RCA VR681HF - Controlling a TV

15
Using the Remote Control
Controlling a TV
This remote can be programmed to control a compatible TV—other manufacturer‘s brands. To program the
remote, use the TV code that corresponds to your TV brand by following the directions.
Program the remote for a TV
Operate the TV
After you have set up your remote to control your TV, test the buttons to see
which ones operate your TV.
1. Point the remote at the TV and press TV POWER.
2. Use the “TV Function Buttons” as described on page 13.
1. Turn on the TV.
2. Point the VCR remote at the TV.
3. Press and hold the SELECT TV button, then enter the two number buttons
for your TV code. If the TV changes channels when the CHAN up or down
button is pressed, setup is complete.
4. Release the buttons.
5. Repeat steps 2 – 4 with two other buttons if the first ones do not work.
*The remote may not be able to control every TV model of the brands listed.
Helpful Hint: Notice the difference
between the TV and VCR on-screen
displays. This is one way to tell if the
remote is set to control the VCR or the TV.
Brand * Code
Daewoo . . . . . . . . . . . . .19
Emerson . . . . . . . . . . . . .21
GE . . . . . . . . . . . . . . . . . . .01
Goldstar . . . . . . . . . . . . . .06, 08, 18
Hitachi . . . . . . . . . . . . . . .10
JVC . . . . . . . . . . . . . . . . . .11
Magnavox . . . . . . . . . . . .04
Mitsubishi . . . . . . . . . . . .13
Brand * Code
Panasonic . . . . . . . . . . . .12
RCA . . . . . . . . . . . . . . . . .01
Samsung . . . . . . . . . . . . .02, 14, 15
Sanyo . . . . . . . . . . . . . . . .05, 20
Sharp . . . . . . . . . . . . . . . .07, 16, 22
Sony . . . . . . . . . . . . . . . . .03
Toshiba . . . . . . . . . . . . . .09
Zenith . . . . . . . . . . . . . . .17
TV Codes