RCA VR681HF - Page 15

13
Using the Remote Control
VCR Function Buttons
(continued)
TV Function Buttons
Press the SELECT TV button to set remote to control a compatible TV. Some buttons
may not work with the TV.
Buttons
JOG + / – (Frame Advance)
Lets you view one frame with
each press of the button in the
pause mode.
MENU
Displays the MAIN MENU on the
TV screen.
Removes a menu from the screen.
Numbers (0 through 9)
Select a channel up to 99 by
pressing two numbers.
PAUSE
Pauses action for viewing during
playback.
Pauses recording to prevent
recording of unwanted scenes.
PLAY
Plays a tape.
PROG LIST
Lets you program timer
recordings.
RECORD
Starts VCR recording.
REPEAT
Lets you review the last five
seconds during playback or press
0:00:00 to repeat.
REW (Rewind)
Rewinds the tape when the VCR is
stopped.
Searches the picture in reverse
motion during playback.
SHUTTLE
Used with variable speed picture
search during playback.
SKIP
Lets you advance tape 60 or 120
seconds during playback.
SLOW – / +
Used for slow-motion playback.
SP SLP (Tape Speed)
Selects the recording speed
(SP or SLP).
STOP
Stops the normal functions such as
record, playback, rewind, fast
forward, and pause of the VCR.
TRACKING Up and Down
(Use PAGE s/t)
Lets you manually reduce the
streaks that may appear on the
picture during play or pause.
Reduces picture “jitter” during
stop-action playback.
TV•VCR
Switches the picture signal so
that it either comes from the VCR
or the TV channel. See page 10.
VCR POWER
Turns VCR on or off.
100
Select a cable channel over 99 by
pressing and holding 100 until 1--
appears on the screen. Then press
the other two numbers.
ARROWS
Move through the menus.
Adjust clock setting and timer
recordings.
CHAN s/t
(Channel Up or Down)
Selects next higher or lower
channel in the TV’s channel
memory when remote is set to
control the TV.
CLEAR
Removes menus or status displays
from the screen.
DISP (Display)
Shows the status displays on the
screen.
Removes menus or displays from
the screen.
INPUT
Selects the TV line input.
MUTE
Turns the TV sound on or off.
Numbers (0 through 9 )
Select a channel up to 99 by
pressing two numbers.
SLOW – / +
Used with the TV’s menus to
select and adjust features.
TV POWER
Turns a compatible TV on or off
when remote is set to control TV.
Used with SELECT TV button to
turn on a compatible TV, other
than RCA, when the remote is set
to control that TV.
VOL +/–
( Volume Up and Down)
Raises and lowers sound.