MAINTENANCE
The Maintenance menu includes: Save Log, Upgrade, Calibrate, Self Test, Reset Defaults, Rediscover, System
Status, and OLPF.
SAVE A LOG FILE
A log file is a detailed text file of the processes and operations performed by the camera. If you contact RED for
support, you may be asked to send a log file.
To save a log file, follow the instructions below:
1. Ensure that a RED MINI-MAG SSD is properly mounted to the camera.
2.
Go to Menu > Settings > Maintenance.
3.
Select Save Log.
The log file is saved as a *.txt file in the SSD root directory.
For more information about RED support or to create a support ticket, go to https://support.red.com.
NOTE: The camera automatically saves a log file when it is turned off properly and an SSD is mounted.
UPGRADE
You can check for upgrades for the following items:
Camera: Go to "Upgrade Camera Firmware" on page181.
Media: For more information on the media upgrade procedure, see the DSMC Media Operation Guide, available at
www.red.com/downloads.
C OPYRI GHT © 2017 R ED.C O M , I NC 955- 01 38 _V6.3, REV-D | 129
WEAPON/EPIC-W OPERATION GUIDE
To Next Page
Loading...
