Red Dragon WEAPON/EPIC-W - Page 47

INSTALL THE FOCUS HOOK
For more information on the focus hook storage location and mounting point, go to "BRAIN" on page13.
REQUIRED TOOLS: 1.5 mm hex key, slotted screwdriver
1. Remove the M3x0.5 x 3 mm set screw from the focus hook mounting point on the media bay using a 1.5 mm hex
key.
NOTE: Store the screw in a safe location, or install it in the focus hook storage location after you remove the focus
hook in Step 2.
2. Remove the focus hook from the focus hook storage location on the media bay using a slotted screwdriver.
3. Tighten the focus hook into the focus hook mounting point on the media bay using a slotted screwdriver.
WARNING: DO NOT OVERTIGHTEN.
C OPYRI GHT © 2017 R ED.C O M , I NC 955- 01 38 _V6.3, REV-D | 47
WEAPON/EPIC-W OPERATION GUIDE