Ellipse INSTALLATION GUIDELINES
70-00159-01-09 Proprietary Redline Communications © 2015 Page 47 of 52 April 29, 2015
Figure 31: Reference: DC-DC PoE Power Sector controller Block
Ground Lug
A #10 grounding lug is located on the back panel. This is a common ground. The ground
lug is connected directly to the PoE chassis and the ground pin (GND) on the input
power connector.
Figure 32: Reference: DC-DC PoE Ground Lug
PoE Dimensions
The surge arrestor dimensions (h-d-w) are 110 x 34 x 135 mm (4.4 x 1.3 x 5.4 in).
Figure 33: Reference: DC-DC PoE Mounting Dimensions
To Next Page
Loading...