MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC
8540780 • 10/07/2020 • Rev.38 215
Equality check (max number = 16)
This operator checks if two analog inputs are
equal within a selectable value.
The signals must have the same physical unit
and must be generated by sensors of the same
type (4/20mA, 0/20mA or 0/10V) but they can
have different scales.
The output Q will be 1 (TRUE) when the
condition of equality is verified. If the two
signals differs of an amount greater than the
allowed error then the .
Parameters
Allowed error:
Corresponds to the maximum tolerance between the difference of the values AN1 and AN2.
Force output FALSE on anomaly:
ue value
assumes a full scale value), the output of the block will remain at 0 (FALSE) as in the
presence of different signals.
To Next Page
Loading...
Need help?
General
