Need help?Do you have a question about the Reflex Reflexomat Series and is the answer not in the manual?
General| Brand | Reflex |
|---|---|
| Model | Reflexomat Series |
| Category | Control Unit |
| Language | English |
Explains the meaning of symbols and signal words used in the manual.
Specifies the required qualifications for personnel operating the equipment.
Lists the necessary personal protective equipment for working with the system.
Details residual risks and necessary precautions, including burns and heavy weight.
Provides safety instructions and general steps for electrical connection.
Lists the conditions that must be met before starting the commissioning process.
Explains how to calculate and determine the minimum operating pressure for the controller.
Guides the user through the controller's start routine for initial parameter setup.
Guides the user on how to start the automatic mode after initial commissioning.
Explains the automatic mode, its functions like pressure maintenance and make-up.
Details the components and functions of the operator panel.
Introduces the process of configuring controller settings.
Provides an overview of the customer menu and its PM codes for settings.
Demonstrates how to adjust system-specific values using the time setting as an example.
Lists the default settings for the controller and explains how to adjust them.
Explains how messages are displayed, their causes, and how to reset them.
Summarizes the regular maintenance tasks, conditions, and intervals.
Details how to check and verify the compressor and make-up switching points.
To Next Page
