Reflexomat with Touch controller — 06.07.2016 - Rev. B English —
Connection to the facility system
Risk of injury due to falls or stumbling
Bruising caused by falls or stumbling over cables or pipes during installation.
• Wear personal protective equipment (helmet, protective clothing, gloves, safety boots).
• Ensure proper installation of cables and pipes between the control unit and the tanks.
Damage due to improper installation
Additional device stresses may arise due to the connection of pipes or system equipment.
• Ensure that pipes are connected from the device to the system without stresses being induced.
• If necessary, provide support structures for the pipes or equipment.
Damage to cables and pipes
If cables and pipes are not routed professionally between tanks and the control unit, they may become damaged.
• Route cables and pipes in a professional manner over the flooring.
To Next Page
Loading...
