Renishaw NC1 - Page 80

78
Profile checking a Ø20 mm (0.787 in) tapered cutter with
10° side taper
Check the profile is within ±0.05 mm (0.002 in).
The profile check starts at 1 mm (0.040 in) high and 10.176 mm
(0.401 in) radial, and then moves along the taper for 30 mm
(1.181 in).
%_N_????
T1
M6
D1
L9800
R11=1.R06=.05R17=80.R24=30.R25=10.176
L9865
M30
Cutter radius and linear profile checking