RC4500 Antenna Controller Chapter 5 MODES – In Depth Descriptions
96
RESET CODE: CONFIG-LOC
5.2.1.2.6 Location Reset
<5 DIGIT CODE>ENTER 12345 TO RESET
The LOCATION RESET screen is used to reset the stored antenna location. After the 5 digit code
<12345> is entered, a confirmation screen will appear. Press the “BKSP” key to accept.
CONFIG-LOC
* RESETTING ANTENNA LOCATION WILL *
* CLEAR ALL STORED SATELLITE DATA *
<BKSP>CONFIRM RESET <MODE>EXIT
After the location reset has been accepted, all previously stored satellite positions are deleted. The
controller redirects the user back to the LAT/LON screen where the antenna’s latitude and longitude must
be entered.
To Next Page
Loading...
