RESEARCH CONCEPTS RC4500 - Define System Time

RC4500 Antenna Controller Chapter 4 Software Configuration / Installation
62
4.1.4 Define System Time
An additional recommended step is to set the date/time within the ACU. The Date/Time will be set to UTC
at the factory but the internal clock may drift several seconds per month.
Go to the MAINTENANCE – TIME screen to check and set the date and time. Accurate date/time is
particularly important for installations performing Two Line Element (TLE) tracking.
Note that all dates are displayed and entered in day/month/year (DD/MM/YY) format. All times are
displayed and entered in hour/minute/second (HH:MM:SS) format. Refer to
section 2.1.2 for instructions
on entering date and time.
SYSTEM:11/10/97 22:26:40 TIME
DISPLAY:11/10/97 16:26:40 ZONE:UTC
OFFSET: 0
1-DATE 2-TIME 4-ZONE 5-OFFSET