RESEARCH CONCEPTS RC4500 - Embedded Controller to Aiu; Mechanical Mounting

RC4500 Antenna Controller Chapter 3 Mechanical & Electrical Installation
39
3.3 Embedded Controller to AIU
This section describes the mechanical and electrical interfaces of the RC4500 in a weatherproof, outdoor
enclosure.
3.3.1 Mechanical Mounting
The RC4500 available in an embedded enclosure that is typically installed within a larger enclosure of an
AIU (Antenna Interface Unit), typically the AIU7. Detailed information regarding the mechanical and
electrical interface specific to connecting an AIU7 to an antenna may be found in the AIU7 Appendix.
The RC4500 embedded enclosure measures approximately 9.35” x 7.5” x 3.65” (L x W x H).
The following picture shows an embedded RC4500 installed within the enclosure of an AIU7.