RC4500 Antenna Controller Chapter 2 Basic Operation
16
2.1.4 Menu Structure
The functionality of the RC4500 is achieved by placing the controller in the desired mode of operation.
The following figure shows the hierarchy of the RC4500’s modes. Each mode has a unique display
screen that presents the information applicable to that mode’s operation.
As the figure shows, there are two main groups of modes – operating and programming. Transitions
between modes within a group are initiated via a momentary press of the Mode key, while a transition
between the two groups requires the Mode key to be held down for three seconds.
After installation, the programming group of modes will typically not be used for day to day operations.
Chapter 4 walks through a typical installation. Chapter 5 provides full details of each mode.
To Next Page
Loading...
