RC4500 Antenna Controller Chapter 5 MODES – In Depth Descriptions
111
AZDP: AZ/EL DELTA FACTOR <0.5 – 1.5>
The track_az_dp_item allows step sizes to be biased for different effective azimuth and elevation
diameters. The default value of 1.0 will calculate steps assuming the antenna’s azimuth and elevation
diameters are the same. A value of 1.1 will increase elevation steps by 10% and decrease azimuth steps
by 10%. A value of 0.9 will decrease elevation steps by 10% and increase azimuth steps by 10%.
To Next Page
Loading...
