RC4500 Antenna Controller Chapter 2 Basic Operation
11
Mode No specific function
Momentary push switches between modes
within group.
Button held for 3 seconds switches between
operational and programming groups.
Momentary push also exits sub-mode screens.
Scroll Up
Angle/CT
Toggles between angular and
pulse az/el position display in
Manual Mode
Scrolls forward through lists.
Provides “YES” answer to prompts.
Scroll Dn
RF/SS
Toggles between RF/SS1/SS2
signal strength display in Manual
Mode
Scrolls backward through lists.
Provides “NO” answer to prompts.
Enter Heading Fix in Manual Mode
Complete entry of data.
Select entry from list.
Access sub-mode in CONFIG mode.
1
Pol CCW
Jogs polarization motor counter-
clockwise when pol movement is
allowed
Supplies “1” for numeric entry.
<1>
2 N
El UP
Jogs elevation axis up when in
MANUAL mode
Supplies “2” for numeric entry.
<1>
Supplies NORTH for latitude entry.
3
Pol CW
Jogs polarization motor
clockwise when pol is movement
allowed
Supplies “3” for numeric entry.
<1>
4 E
Az CCW
Move azimuth axis counter-
clockwise in MANUAL mode
Supplies “4” for numeric entry.
<1>
Supplies East for longitude entry. (123°45E)
5
H/V
Commands Cross-Polarization
movement in MANUAL mode,
Store
Supplies “5” for numeric entry.
<1>
<1> Numbered keys may also be used to select from a set of choices such as <1>LOCATE <2>STOW.
To Next Page
Loading...