REVISION HISTORY
Update Chapter 2, replace board-stack
information with separate rack-mount and
Update of Chapter 3 screens.
Corrected discrepancies in the AZ Jam
Slop and Runaway Slop descriptions
Large Updates with software update to
version 2.03.
Removed all references to LOCATE in the
MENU mode, updated chapter 3 to remove
references to LOCATE, Preset Satellites,
Preset Locations and STOW/DEPLOY. Moved
Operation Overview to the Introduction
chapter. Change STORE to SETUP in the
MENU mode. Many corrections to CONFIG
Reorganized entire manual. Additional
corrections made to many screenshots and
descriptions based on software version
2.03.
Reorganized chapters, the installation
procedure is now separated from the
trouble-shooting section.
Created hyper-links for chapter and
section references within the document.
Added detailed descriptions of signals
for J6 – Auxiliary I/O and J7 – Antenna
I/O connectors in sections 3.1.2.3 and