RC4500 Antenna Controller Chapter 3 Mechanical & Electrical Installation
27
Connector J6 Auxiliary I/O Signal Descriptions (continued):
Pin # Signal Name Description
9 Drive Common This terminal is internally connected to the Drive Common pins
found on the Antenna I/O connector (J7 pins 2, 5, 8).
13 Ground This pin is tied (internally) to the ground return of the RC4500’s
24VDC system power supply. (typically not used)
25 24VDC This pin is tied (internally) to the RC4500’s 24VDC system power
supply. (typically not used)
To Next Page
Loading...
