Retsch Emax - Electromagnetic Compatibility (EMC); Rated Power; Motor Rotation Speed; Dimensions and Weight

Technical Data
14
Example 2:
Container:
2 zirconium grinding jars (125 ml)
Grinding body:
275 g ZrO
2
balls each (2 mm)
Feed material:
Quartz sand (~ 0.5 mm) plus
water (35 ml)
Feed quantity:
40 g
Speed:
1 500 rpm
At these operating conditions, the workplace related equivalent continuous sound level
L
eq
= 76 dB(A).
3.4 Electromagnetic Compatibility (EMC)
− EMC class according to DIN EN 55011: A
3.5 Rated Power
~ 3 100 W (VA)
3.6 Motor Rotation Speed
− Motor rated speed: 300 – 2 000 revolutions per minute (rpm)
− Adjustable as required
3.7 Dimensions and Weight
− Height: 525 mm
− Width: 625 mm
− Depth: 645 mm
− Weight: ~ 120 kg (without grinding jars)
3.8 Required Floor Space
CAUTION
C5.0047
Risk of injury caused by the device falling down
Incorrect installation of the device
− Due to its weight, the device can cause injuries if it falls down.
• Only operate the device on a sufficiently large, strong and stable
workstation.
• Ensure that all of the device feet are securely supported.
− Height with open hood: ~ 945 mm
− Width of the base: 625 mm
− Depth of the base: 655 mm
Location requirements:
The device must be placed on a vibration-free and stable surface.
3.9 Receptacle Volume
The receptacle volume (feed volume) depends on the sample material and on the device
configuration and setting.