The individual functions are described in detail in the following subchapters.
Press the button to return to exit the "Settings" menu.
7.7.1 Languages
In this menu the language of the control panel can be selected.
Press on the desired language. After the selection, the entire menu structure is displayed in
the selected language.
An exception is the control panel area of the device control (B3). The buttons for the device
control are displayed in English only.
7.7.2 Date and Time
Under this menu item, the current date and time can be changed and saved.
Set the current date by means of the [+] and [–] buttons in the first window.
Confirm the input by pressing the [Done] button.
Set the current time by means of the [+] and [–] buttons in the second window.
Confirm the input by pressing the [Done] button. Date and time are now saved.
The device can be disconnected from the mains for up to 30 days without losing the settings.
7.7.3 Signal Tone
The end of the grinding process, as well as occurring error messages can be signalled
acoustically by a warning tone.
Press the signal tone button to activate or deactivate the acoustic warning tone.
The activated function is marked with the icon.
7.7.4 Automatic Opening
With activated automatic opening the grinding chamber hood is automatically lifted slightly once
the grinding process has ended.
Press the automatic opening button to activate or deactivate the function.
The activated function is marked with the icon.
When the function is deactivated, the grinding chamber hood must be opened manually using
the button (B3.1).
7.7.5 Extended Time
During the grinding process the grinding jars can heat up significantly. With the extended time
function, the cooling circuit continuous to run for a set duration (between 0 and 99 minutes) after
the end of the grinding process. This helps to cool down the grinding jars more quickly.
Press the extended time button. The window for direct data entry appears. The time in
minutes can either be set directly using the numeric buttons or stepwise via the [+] and [–]
buttons.
Press the button to cancel the editing without saving the entry. The entry is not
applied, and the menu displays the previous screen.
Press the button to save the entry. The entry is applied, and the menu displays the
previous screen.
To Next Page
Loading...
