Press the button to save the values. Entered values are applied, and the menu
displays the previous screen.
7.6 Sequence Mode
For special grinding tasks, previously saved programmes can be combined to one sequence in
this mode. This allows for the design of very complex grinding processes.
There are three sequence memory positions available. Each sequence consists of up to ten
freely selectable programmes. Programmes may be repeated within one sequence. The
grinding parameters of the individual programmes, however, cannot be modified in the
sequence mode. To do so, change to the programme mode.
Analogous to the programme mode, an individual heading and description can be assigned to
each sequence.
To Next Page
Loading...
