7.6.1 Select a Sequence
Press the sequence name button (B5.4). The sequence selection window opens. The
current sequence is displayed in grey in the list.
To open the sequence description of the respective sequence, press the icon.
Press on the desired sequence. The sequence selection window closes and the relevant
sequence is loaded.
7.6.2 Sequence Heading and Description
7.6.2.1 Display of the Sequence Description
Press the icon (B5.1) to open the sequence description window. If no sequence
description has been entered yet, the icon (B5.1) is displayed in grey.
Press the button to return to the previous screen.
7.6.2.2 Editing of the Sequence Description and Heading
Press the icon (B5.1) to open the sequence description window.
Press the button to edit the sequence description and heading. The steps for editing
are analogous to those described in Chapter "Editing of the Programme Description and
Heading".
7.6.3 Edit a Sequence
The programme composition of a sequence can only be modified with activated editing.
Press the icon (B5.2) to edit the programmes stored in the respective sequence.
The process times of each programme saved in the sequence are added and displayed as total
process time.
7.6.3.1 Add a Programm to a Sequence
Press the arrow of the last editable memory line marked with "-". The list of all saved
programmes appears.
Press the icon to open the programme description of the respective programme.
Press on the desired programme. The selected programme is added to the sequence and
the menu displays the previous screen.
Press the button to cancel the editing without saving. Changes are not applied and
the menu displays the previous screen.
Press the button to save the editing. Changes are applied and the menu displays the
previous screen.
7.6.3.2 Change a Programm of a Sequence
Press the arrow of the memory line containing the programme to be changed. All further
steps are analogous to the adding of a programme to a sequence.
To Next Page
Loading...
