Retsch Emax - Select a Programme; Programme Heading and Description; Display of the Programme Description; Editing of the Programme Description and Heading

Controlling the Device
49
− Pause time
− Speed
− Interval
− Direction reversal
Please refer to Chapter "Grinding Parameters" for a detailed description of the parameter
settings.
Furthermore, an individual heading and description can be assigned to each programme.
7.5.1 Select a Programme
Fig. 31: Programme mode functions
 Press the programme name button (B2.4). The programme selection window opens. The
current programme is displayed in grey in the list.
 To open the programme description of the respective programme, press the icon.
 Press on the desired programme. The programme selection window closes and the relevant
programme is loaded.
7.5.2 Programme Heading and Description
7.5.2.1 Display of the Programme Description
 Press the icon (B2.1) to open the programme description window. If no programme
description has been entered yet, the icon (B2.1) is displayed in grey.
 Press the button to return to the previous screen.
7.5.2.2 Editing of the Programme Description and Heading
 Press the icon (B2.1) to open the programme description window. If no programme
description has been entered yet, the icon (B2.1) is displayed in grey.
 Press the button to edit the programme description and heading. A further window to
edit the programme description and heading opens.
 To edit the heading, press on the edit box (B4.1). Use the keypad (B4.4) for entries and
editing.
 To edit the programme description, press on the edit box (B4.2). Use the keypad (B4.4) for
entries and editing.
Simple text editor functions allow for the adding of terms to a dictionary, as well as the deleting,
cutting, copying, replacing and/or inserting of words. The number of characters in the
programme description is limited to 1 000 characters. The number of characters in the heading
is limited to 15 characters.
PROGRAM
22.04.2014
14:23
B2.1
B2.2
B2.4