2.5 Repairs
This manual does not contain any repair instructions. For safety reasons, repairs may only be
carried out by Retsch GmbH or an authorised representative or by qualified service technicians.
In case of repair, please inform…
…the Retsch GmbH representative in your country,
…your supplier, or
…Retsch GmbH directly.
Service address:
2.6 Preventing risks during normal operation
The failure to comply with the following safety instructions constitutes improper use and
presents a risk to personnel and to operational safety.
Transport and installation
• Do not carry the device by yourself during transport and installation.
• Wear safety footwear for transport and installation.
• Only connect the device to sockets with a PE protective conductor.
• When connecting the device, the values on the type plate must correspond to those for the
power connection.
Operation
• Read the manual before commissioning the device.
• Only operate the device at a workstation of sufficient size that offers adequate stability.
• Check the mains lead for damage before operating the device.
• Never operate the device if damage is visible or suspected.
• Only operate the device according to the technical application limits.
• During operation, do not wear any jewellery, wear your hair down or wear a tie or similar
loose item of clothing.
• Wearing hearing protection during operation.
• Before operating the device, take measures that take account of restricted communication
during operation of the device.
• Pay attention to your surroundings during grinding because the noise makes it more difficult
to pick up acoustic signals.
• Do not operate the device in potentially explosive atmospheres.
To Next Page
Loading...
