EasyManua.ls Logo

Retsch MM 400 - Grinding Process

Retsch MM 400
85 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating the Device
41
6.7 Grinding process
CAUTION
C9.0004
Risk of injury
Explosive or flammable samples
Samples can explode or catch fire during the grinding process.
Do not use any samples in this device that carry a risk of explosion
or fire.
Take note of the safety data sheets for the sample material.
CAUTION
C10.0006
Risk of injury
Sample material that is harmful to health
Sample material that is harmful to health can injure people (illness,
contamination).
Use suitable extraction systems with sample material that is
harmful to health.
Use suitable personal protective equipment with sample material
that is harmful to health.
Take note of the safety data sheets for the sample material.
CAUTION
C11.0010
Risk of burns or poisoning
Varying sample properties
The properties and therefore also the chemical reactivity of the sample
can change during the grinding process and can cause burns or poisoning
as a result.
Do not process any substances in this device whose chemical
reactivity is so changed by grinding that there is a risk of explosion
or poisoning.
Take note of the safety data sheets for the sample material.
WARNING
W8.0000
Risk of injury caused by liquid nitrogen
Use of liquid nitrogen during cryogenic grinding
Liquid nitrogen has a boiling point of 196 °C and causes burn-like
injuries and frostbite if there is skin and eye contact.
Take note of the liquid nitrogen safety data sheets.
Always wear goggles and protective gloves when using liquid
nitrogen.

Table of Contents

Related product manuals