Ambient temperature
Temperatures outside the permitted range
− Electronic and mechanical components may be damaged.
− The performance data alters to an unknown extent.
• Do not exceed or fall below the permitted temperature range (5 °C to
40 °C ambient temperature) of the device.
Humidity
High relative humidity
− Electronic and mechanical components may be damaged.
− The performance data alters to an unknown extent.
• The relative humidity in the vicinity of the device should be kept as
low as possible.
− Installation height: max. 2 000 m above sea level
− Ambient temperature: 5 °C – 40 °C
− Maximum relative humidity < 80 % (at ambient temperatures ≤ 31 °C)
For ambient temperatures U
T
between 31 °C and 40 °C, the maximum relative humidity value L
F
linearly decreases according to L
F
= –(U
T
– 55) / 0.3:
The MM 400 must be installed on a stable and solid surface. Vibrations from the device will
otherwise be transmitted to the surroundings during the grinding process.
4.6 Remove packaging
+
Remove the packaging and take out the device as follows:
Place the device supplied in the box on a stable surface and open the box.
Carefully remove the device from the box.
Keep the carton and packing material in case you need to return the device.
To Next Page
Loading...
