EasyManua.ls Logo

Retsch MM 400 - Removing the Transportation Lock

Retsch MM 400
85 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Packaging, Transport and Installation
28
4.7 Removing the Transportation Lock
WARNING
W3.0005
Risk of injury due to the device falling down
Lifting the device above head height
The device can fall causing serious injuries when lifted above head
height.
Never lift the device above head height!
NOTICE
N10.0018
Transportation lock
Transport without transportation lock, or operation with transportation lock
Mechanical components may be damaged.
Only transport the device with mounted transportation lock.
Do not operate the device with built-in transportation lock.
To avoid shaking of the device during transport, the device is equipped with a transport safety
device at the factory. The transport safety device is located on the underside of the device and
must be removed before using it for the first time. The tools required are included with the
device.
Remove the transport safety device as described below:
There is an arrow on the underside, which indicates the transport safety device.
Carefully tip the device backwards or to the side and onto a soft surface.
Loosen the screw in the middle of the underside and remove the transport safety device (4).
Keep the transport safety device for future transport of the device.
NOTEWhen operating with the transport safety device in place, or transporting the device
without the transport safety device, mechanical components may be damaged.
Fig. 8: Releasing the transport safety device
4

Table of Contents

Related product manuals