10.1.3 Cleaning the grinding tools and cassette
Cleaning the grinding tools and the cassette includes cleaning the labyrinth disc, the rotor, the
ring sieve and the cassette with lid.
Clean the grinding tools as follows:
1. If used, remove the grinding tools:
• Cassette (26) with lid (23),
• Ring sieve (24),
• Rotor (25) and
• Labyrinth disc (27)
from the interior (10).
2. Clean the grinding tools (24, 25, 27) and
cassette (26) with lid (23), depending on
the degree of soiling, individually with a
brush, a vacuum cleaner, a damp cloth
and/or a suitable cleaning agent. In case of
heavy soiling, the individual parts can also
be cleaned in the dishwasher.
3. If necessary, allow the grinding tools (24,
25, 27) and the cassette (26) with lid (23) to
dry sufficiently before reinserting them.
➔ The grinding tools and the cassette are
cleaned.
To Next Page
Loading...
