Need help?Do you have a question about the RFI ASM1317 and is the answer not in the manual?
Details connecting the ASM via Ethernet, GUI access, and IP settings.
Describes the login process and user access levels for the ASM GUI.
Reports the current status of System Isolation Tests, including settings and results.
Shows the current status of the optional Receive Systems Module (RSM).
Reports the current status of Rx channels, displaying up to 20 channels per page.
Reports the current status of Tx channels allocated to the selected Tx Port.
Displays the current system settings and alarm summary.
Reports the status of the selected Site Alarm Module (SAM).
Reports the status of the selected Channel Alarm Module (CAM).
Reports the current Ethernet, Email, and SNMP communications settings.
Displays logged Isolation Tests values, with options for Antenna Isolation, Rx Gain, and Tx Rejection.
Displays logged Rx Power values for all channels, with selectable Rx groups and data modes.
Displays logged Tx Power values for a nominated channel, with selectable ports, periods, and data modes.
Presents a real-time Tx Power and Rx Level Meter for selected channels.
Configures parameters for System Isolation Tests, including frequencies and thresholds.
Configures parameters for the optional Receive Systems Module (RSM).
Configures individual Rx channel parameters like frequency, modulation, and threshold power.
Configures individual Tx channel parameters for Tx Port 1, including frequency and modulation.
To Next Page
General