ASMxxxx Series User’s Manual
Asia Pacific | EMEA | Americas 88
10.34 Configuration – Alarm Settings – Isolation Tests
The “Configuration – System Isolation Test Alarms” page allows this test's parameters to be entered.
Tx Reverse Coupling Loss:
The value of coupling loss that has been entered in the Tx Port Calibration page. This value is used in the calculation of the
System Isolation Tests values.
Tx Feeder Loss:
The value of Tx Antenna Feeder loss that has been entered in the Tx Port Calibration page. This value is used in the calculation
of the System Isolation Tests values.
To Next Page
Loading...