ASMxxxx Series User’s Manual
Asia Pacific | EMEA | Americas 33
10.7 Status - Rx Channels 1-20
The “Status - Rx Channels” pages report the current status of Rx channels. To prevent display clutter, Rx channels are
displayed with up to 20 channels shown per page.
Chan No:
Indicates the configured sequential channel number.
Channel ID:
The user configured description for the channel.
NW ID:
Allows channels to be affiliated with a network (i.e. “1” is Police Network, “2” is Fire Network), to an antenna system (“1” is Tx
Antenna #1, “2” is Tx Antenna #2), or to another label (i.e. “1” is 24x7 Maintenance, “2” is Normal Hours Maintenance) and this
label will appear in Alarm Messages to allow faster determination of response priority and or actions.
Note: The NW ID column is only displayed if this feature is enabled in the “Configuration – User Data” screen.
ON:
The configured channel scanning On/Off status. If this is “OFF”, the measurements for this channel will not be performed. This
field may be used if channels have been disabled or temporarily removed from the site.
Freq:
The configured frequency of the channel.
To Next Page
Loading...
General